JBA Performance Exhaust

Technical Information :: 6651S Tri-Y Headers

JBA Equipped - Austin Bittle's ‘69 Mustang .
Click to Enlarge

JBA p/n 6651S headers are designed to fit ‘64-1/2 - ‘70 289/302 (not Boss) Mustangs equipped with 4 spd manual or C3/C4 automatic transmissions. These headers are not designed for 5spd applications.

These headers provide significant increases in torque and horsepower throughout the RPM range and allow for maximum ground clearance.

To help make sure you choose the correct headers and exhaust for your Mustang please refer to the chart below. If you still have questions, give us a call.

*actual product may differ from product shown

:: P/N 6651S Fitment Guide ::
Specifications: 1-1/2" stainless steel primary , 1-3/4" secondary, 2-1/2" collector, 3/8" laser-cut flanges
Engine	Cylinder Head	Trans. cross member	Block	Clutch	Trans.
289/302	289/302/5.0 "Windsor" Stock Port location	Stock	Stock. - OK	Stock mech. with factory Z-bar or use JBA p/n 1650Z	C3/C4 auto
Motor Mounts	Bell Housing	Starter	Suspension	Steering
Stock or Total Control	Stock or scatter shield. Scatter shield may require clearance.	Stock or mini starter	Reproduction upper A-arm mounting studs may need to be shortened.	Manual - OK Total Control Rack & Pinion - OK Factory P/S - OK with JBA Bracket P/N 6656P