JBA Equipped - Jamie Marsh's ‘65 Mustang 302 Fastback Click
to Enlarge
|
JBA
p/n
1650 headers are designed to fit ‘64-1/2 - ‘70
289/302 (not Boss) Mustangs equipped with 4spd/5spd/C4/C6/AOD
transmissions.
The mid-length design of the headers provides significant
increases in torque and horsepower throughout the RPM
range and
allows
for
maximum ground clearance. Ideal for cars with lowered
suspension.
To help make sure you choose the correct headers, h-pipe and exhaust for your
Mustang please refer to the chart below. If you still have questions, give us
a call.
Note: These headers will work with a stock mechanical clutch using the factory
Z-bar. If Z-bar is modified or worn use JBA p/n 1650Z.
Starter
tubes
are
included
to
mate
your
existing
exhaust
system
to
the
headers. For best results use JBA p/n 1650H H-pipe. |
*actual
product may differ from product shown
|
| ::
P/N 1650 Fitment Guide :: |
Specifications:
1-5/8 " 14 ga mild steel primary tubes,
2-1/2" Firecone® merge collector,
3/8 " laser-cut flanges |
Engine |
Cylinder
Head |
Block
|
Trans.
X-member |
Clutch |
Trans. |
289/302 |
289/302/5.0
"Windsor"
Stock
Port
location
|
Stock. -
OK
|
Stock
- OK
or
JBA p/n 1751, 1752, 1753 or 1754 |
Stock
mech. with factory Z-bar or use JBA
p/n 1650Z |
4spd/
5spd/
C4/C6
AOD |
Motor
Mounts |
Bell
Housing |
Starter
|
Suspension |
Steering
|
H-pipe |
Stock
or Total Control |
Stock
or
scatter shield. Scatter shield may require clearance. |
Stock
or
mini starter |
Reproduction
upper A-arm
mounting studs may need to be shortened. |
Manual
- OK
Rack & Pinion - OK
Factory P/S - OK
|
Use
JBA p/n 1650H |
|
